| | | Instek SFG-2010 10 MHz. DDS Function Generator |  | | |
| • | DDS Technology and FPGA Chip Design | | • | Frequency Range - 0.1 Hz to 10 MHz. | | • | Sine, Square, Triangle Waves | | • | Output 10 Vp-p into 50Ω Load, 20 Vp-p Open Circuit | | • | 9 Digit LED Display | | • | 10 Front Panel Setup Memories | | • | DC Offset, TTL & CMOS Aux. Outputs | | • | Frequency Accuracy & Stability: ± 20ppm | | | | | • | Complete with User Manual, Power Cord,
GTL-101 BNC to Alligator Clip Coax Test Lead | | | | | • | NIST Cal. / Certificate available..... what's this? | | • | Warranty - Error: Data not available (103) ..... details | | | | See Data Sheets Below For Detailed Specs |
| 
View Larger Image
See also the SFG-2110, which
adds sweep, counter, & modulation,
at a slightly higher cost. |
| | |
| | Current Promotions For This Item | | |
Based on Direct Digital Synthesized (DDS) technology and unique FPGA design, the SFG-2000/2100
Series Function Generators are built with exceptionally high performance far exceeding that of any
conventional function generators at a very competitive price. Stable output frequency, low distortion,
and fine frequency resolution are the most remarkable characteristics of this series.
The SFG-2000/2100 Series include four members in each family at 4MHz, 7MHz, 10MHz and 20MHz
bandwidth. The SFG-2100 Series have additional functions of Sweep, AM/FM modulation, and
External Counter. As a result of the 20ppm stability level and output waveform accuracy, the SFG
2000/2100 Series well fit into a wide variety of applications, such as signal generation for labs,
reference signals for PLL (Phase Locked Loop), and calibration and adjustment for electronic
devices. |
|
|
|
Merchant
){kind=link}